MFG full information sheet | mirage-products

The objective when fighting a fire is to extinguish the blaze in as short a time as possible and at the same time preserving water and minimize Water Damage

With the expertise of Mirage Products in conjunction with a leading University, extensive research was conducted, where efforts were directed towards producing a viable means for optimization of

Fire Fighting Water

Continuous research and numerous trials lead to the development of a new environmentally friendly additive for firefighting water: The ingenious innovation of:

MIRAGEFIRE GEL (MFG)

MFG is a polymer-based mixture containing inorganic materials which swells to a gel when combined with water. Ratio 1L:250L

SUBJECT: FIRE FIGHTING WATER

The most frequently used fire-fighting medium is still water. The extinguishingproperties of water are based primarily on its cooling effect, e.g, the combustible material is cooled to a temperature below its ignition point, the heat removed from the source of the fire is taken up by the water and removed to a certain extent with the steam, 95 % of the water flows away. It has been demonstrated in laboratory tests that when water is employed on its own, 95 % flows away immediately.

Mirage FIRE / GEL increases the viscosity of the water, therefore causes the water to adhere to the burning

material, thus allowing it to unfold its maximum cooling effect.

MFG causes the water to cling to the burning object and this effect is long-lasting.

The revolutionary effect of MFG has been demonstrated in large – scale tests conducted, using the most varied materials in simulated realistic situations.

Increased cooling effect and constant rate of evaporation of the adhering water.

The polymer surrounds the water and binds it, thus preventing it from flowing away or evaporating too quickly. The effectiveness of the applied water, quantity for quantity, is increased many times.

The fire progression curve confirms the effect.

The effect of MIRAGE FIREGEL( MFG ) can be clearly demonstrated on the basis of fire progression curves.

A faster, more drastic reduction of the core temperature of the fire.
Fire is extinguished in a shorter time using less water.
The formation of the salt crust after evaporation of the water creates a barrier which prevents rapid

re-ignition and makes the combustible material flame-resistant.

Creates a cooling barrier against radiated heat.
Spreading of the fire to neighboring objects can be prevented by using theMFG water mixture.

95 % of a MFG water mixture remains

MIRAGE FIRE GEL binds the water and makes it effective.

Using a MFG water mixture in laboratory tests, an exact reversal of the situation could be demonstrated, i.e., 95 % of the water applied remained on the burning object and was therefore able to take effect.

Even if only 25 % of the laboratory values can be achieved the effectiveness is raised by a factor of 5.

In simple terms, this means that 1000 L of water treated with MFG are as effective as 5000 L of water without additive.

SUBJECT: ADVANTAGES OF USING MIRAGE FIRE GEL ( MFG )

This means in practice:

The possibility of using smaller, more maneuverable fire-fighting vehicles.
Faster, targeted containment of the source of the fire using a smaller team.
Savings in time.
Savings in water.
Reduction of water damage.

SUBJECT: MINIMISATION OF DAMAGE

The Victim knows best that even the best precautions are not good enough.

When one reflects on the irreparable damage caused by water used to fight a blaze, and the devastating effect of forest fires on the environment – then it is clear that precautions must be taken. MFG fire gel is the perfect precaution to taken in any CLASS A bush fire.

Protection for persons, materials and the environment:

Swift, targeted and effective action using the right equipment can prevent the catastrophic consequences of, or at least minimize the extent of the damage.

MFG used in first line fire attack will help to ensure that no minor fire results from a latent fire and no major fire from a minor fire.

Because of its excellent prophylactic properties, MFG is particular suitable for object protection in the vicinity of a fire. Fire-fighting personal can concentrate their efforts on fighting the actual blaze instead of spending unnecessary time in wetting down other objects for protection.

MFG additive for fire-fightingwater.The best prophylactic for theprotection of persons, materials
and the environment.

SUBJECT : EFFECTIVENESS

SUBJECT: FIRE – FIGHTING ACCESSORIES

Optimal tools are a must for the professional.

MFG can be used for fighting “class A” Fires involving solid combustible materials. Whether the fire is in open spaces for example, forest fires, in enclosed areas like a flat or house or a factory building. With very little effort and very little changes to your existing firefighting equipment, MFG can be put to use on fire engines, fire boats and helicopters.

MFG can be used for spraying large areas employing a sprinkler – stationary or mobile extinguishing equipment.

MIXTURE RATIO: 1:250 – 1kg (MFG) CAN MAKE 250L

SUBJECT: DISPOSAL

MFG can be disposed of together with the residues from the fire. UV radiation will decompose the polymer within seven days.

No compromise for the environment

A competent and environment friendly product for swift andeffective fire fighting.

Reduced emission of contaminants:

· faster fire containment, therefore reduced emission of contaminants. ( 40 % in the case of normal fires, 50 % in

case of forest fires.)

Less water contamination: